Versions Compared

Old Version 9

changes.mady.by.user Paul Jones

Saved on

compared with

New Version 10

changes.mady.by.user Tim Cantle (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added new diagram(s) for angle lintel

...

Info

70mm strap brace requires two tensioners.


Step 10 - Install

...

lintel (where required)

Fixing Angle Lintel
Image Modified


Overlay and screw fix lintel flashing to top of frame as per assembly sheet and fixing details given in the Design Manual. Image Removed.


HTML Comment

AngleLintelFixingDetails.svg


Angle Lintel Fixing DetailsImage Added

  • Jack Stud and Jamb Stud must be secured to the header with 1xM6 FRAME SCREW at each connection, at each side.
  • Jack Studs must be secured to the top plate with 1xM6 FRAME SCREW at each connection on internal face.
  • Secure Lintel to Frame at external face with M6 GX TEKS Screw in position as shown on diagram.
  • Secure lintel to frame at internal face with M6 GX TEKS SCREW in position as shown on diagram.
SCREWM6 GX TEKS SMOOTH TOP
TOP PLATE0.75mm BMT G550 PLATE
HEADER0.75mm BMT G550 PLATE
JACK STUDS0.55mm/0.75mm BMT G550 Ribbed Cee STUDS
LINTEL200mm x 35mm x 1.5mm BMT G450 ANGLE LINTEL
JAMB STUDS0.75mm BMT G550 Ribbed Cee STUDS


Note

For sheet roof from 15° up to 30°. Truss spacing up to 1200mm.


Note

Detail applies to upper story or single story only.


Fixing ENDUROFRAME Sections as headers

Fixing ENDUROFRAME® sections as headers

...