Versions Compared

Old Version 11

changes.mady.by.user Tim Cantle (Unlicensed)

Saved on

compared with

New Version 12

changes.mady.by.user Tim Cantle (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updated angle lintel detail

...

HTML Comment

AngleLintelFixingDetails.svg


Image RemovedImage Added

  • Jack Stud and Jamb Stud must be secured to the header with 1xM6 1 x FRAME SCREW at each connection, at each side.
  • Jack Studs must be secured to the top plate with 1xM6 1 x FRAME SCREW at each connection on internal face.Secure Lintel to Frame at external face with M6 GX TEKS Screw in position as shown on diagram.
  • Secure lintel to frame at internal to face with M6 GX (s) with 1 x TEKS SCREW in position as shown on diagram.
GX TEKS SMOOTH TOP
Minimum Construction Requirements
FRAME SCREWM6 Frame Screw
TEKS SCREWM6 GX Teks Smooth Top
TOP PLATE0.75mm BMT G550 PLATEPlate
HEADER0.75mm BMT G550 PLATEPlate
JACK STUDS0.55mm/0.75mm BMT G550 Ribbed Cee STUDSStuds
LINTEL200mm x 35mm x 1.5mm BMT G450 ANGLE LINTELAngle Lintel
JAMB STUDS0.75mm BMT G550 Ribbed Cee STUDSStuds


Note

For sheet roof from 15° up to 30°. Truss spacing up to 1200mm.

...