...
All ENDUROWALL® parts are coded with information to assist erectors in the assembly process. This matches the part information shown on the assembly drawings.
All ENDUROWALL® parts are coded in the following order:
Job Name/Number, Frame Number, Part Number and Part Usage. For short parts, some of this information is deleted.
With this information, erectors can identify what the part is and where it is intended to be used in the structure. The illustration below shows how the coding works: 
Figure 6.1 Marking and branding
Job name/number is Test Walls, 5 is the panel number, 001 is the part number and Topplate is usage.
Figure 6.2 A typical wall frame assembly sheet as produced by ENDUROCADD®. The sections are branded when produced in accordance with Section 6.1 of this manual.
...