Installation details
Here are some key fabrication and installation details for the ENDUROFRAME system. Files in the 'PDF Document" column can be downloaded and printed.
Refer to the installation manuals for full details and instructions.
| Description | Where used | PDF document | Recommended Size | Sketchfab Model |
|---|---|---|---|---|
Hip End Installation - Type 1 Hip End | Site | A3 | ||
Hip End Installation - Type 1 Centred Boxed Hip | Site | A3 | ||
Hip End Installation - Type 2 Hip End | Site | A3 | ||
Valley plate installation | Site | A3 | ||
Valley - Extend to Next Truss | Site | A3 | ||
Boxed hip rafter fabrication | Factory | A3 | ||
Gable ladder verges | Site | A3 | ||
Outrigger verges | Site | A3 | ||
ENDUROGRIP Fabrication details - 2 pages | Site / Factory | A3 | ||
ENDUROWALL Fabrication Overview - 2 pages | Factory | A0 | ||
ENDUROTRUSS Connection Details Factory Poster | Factory | A0 | ||
ENDUROTRUSS General Assembly Instruction | Factory | A0 | ||
General Installation Details - 4 pages | Site | A3 / A4 |