...

The internal wall brackets shall be installed at a maximum of1200mm of 1200mm centers along the non-load bearing wall.

...

Connecting Non-Load Bearing to Load Bearing Walls

Any of the 3 options below are suitable in non-cyclonic areas.

Option 1 - Strap

A minimum of  2 x 10-10x16 hex head fasters should be used to connect each end of the 30 x 1.0mm (min) strap. This option is used when there is no top nogging.

...

Option 2

...

- Angle

...

Option 3

...

- Top nogging