Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Fasteners

IMPORTANT
Fasteners used in Structural applications must comply the ENDUROFRAME® Fastener Requirements specification which can be downloaded below.

Fastener Requirements - R2.pdf

Fasteners used should comply with the mechanical properties specified in the /wiki/spaces/EH/pages/35586106. Please check with the manufacturer of frames or the help portal to confirm fastener suitability.

Picture

Description

Application

5/16-12 x 17 Hex Washer Trusstite
Or
17-15 x 15mm GX screw Trilobular thread form

Primary connection of truss components through pre-punched holes.

Both screws listed are suitable for the application.

#10-16x16 hex head self drilling screw.

Low strength fixing- ceiling batten fix, chord and web boxing.
Used in all wall systems

Wall fastener – M6 x 1P x 15mm Smooth Top GX screw
Wall tite
(Trilobular thread form)

Connecting wall frame components together through pre-punched holes. Used in ENDUROWALL™ FRAMING SYSTEM,

#12-14x20 hex head self drilling screws

General Framing Screw- Roof, Wall and Floor frame installation
Used as reinforcing in truss manufacture.

M6,0 x1P x 18,0 Smooth Top Gx Teks

Stiffening stud to plate connections and connecting lintels to plates

M6.5 – 12 x 42 Hex Head Self Drilling Screw

Connecting smart rafters to truncated truss top chords.

The use of the correct fasteners in the quantities shown in the truss fabrication drawings are essential to ensure the design capacity of the trusses are achieved.

Accessory Components

Product

Base Metal Thickness
(mm)

Grade of Steel

Coating

Angle Lintel
200 x 35 mm

1.0
1.5

G550
G450

AZ150
AZ150/
Z275

Angle Trim
35 x 35

0.75
1.00

G550
G550

AZ150
AZ150

Bath Rail

Bath Rail
An additional structural member of a wall panel set into studs to provide a recess for a bath. Bath rails are usually factory-fitted but may be supplied loose.

 

 

Shower Rail

Shower Rail
An additional structural member of a wall panel that is set into the bottom of studs to provide a recess for a shower tray. A shower rail is usually factory-fitted but may be supplied loose.

 

 

Accessory

Material

 

 

Electrical Grommet
28mm

Nylon 6 - Black

 

 

Plumbing Grommet
28mm

Nylon 6 - Black

 

 


  • No labels