Tools and Equipment

Power tools

• Rotary hammer drill (for concrete drilling up to ø20mm) plus appropriate drill bits to suit drill and anchor fixing
• Hand-held grinder and metal blades to suit
• Cordless impact drivers each with driver tips to suit framing screws

Optional Power tool

• Hydraulic hole punches to punch additional service holes - see Stainelec STUD PUNCHERS, and Battery-Hydraulic Stud Punch - 230V Charger | Greenlee

Tool accessories

• 15 amp electrical safety pack and electrical leads (of suitable length)
• 5/16" driver tips to suit hex type
• No. 2 and No.3 Phillips bits
• Spanner & socket sets
• Screw gun Extension bit (length up to 150mm)

Hand tools

• Double action Tin snips (left hand and right hand)
• Locking sheet metal pliers
• 2000 mm spirit level and 1200mm spirit level
• Oil-based marker pens
• Tool belt capable of holding impact driver and screws
• String lines (chalked & unchalked) and line marking chalk
• Adjustable G cramps / vice grips
• Measuring Tape
• Hammer
• Hacksaw and blades
• Old carpenters chisel
• Suitable cold chisel 

Essential safety equipment

• Step ladders
• Fall protection harness
• Carpenters trestles (saw horses)
• Aluminium trestles
• Aluminium planks
• Ply sheeting 2700mm x 1200mm x 15mm (Make platform for fabrication and re-use as scaffold deck for installation)
• Eye protection
• Hearing protection (when using power tools)
• Protective gloves
• Earth leakage circuit breaker for electrical tools