Tools and Equipment
- Tim Cantle (Unlicensed)
- Paul Jones
- Richard Kennedy (Unlicensed)
Owned by Tim Cantle (Unlicensed)
Power tools
- Rotary hammer drill (for concrete drilling up to ø20mm) plus appropriate drill bits to suit drill and anchor fixing
- Hand-held grinder and metal blades to suit
- Cordless impact drivers each with driver tips to suit framing screws
Optional Power tool
- Hydraulic hole punches to punch additional service holes - see Stainelec STUD PUNCHERS, and Battery-Hydraulic Stud Punch - 230V Charger | Greenlee
Tool accessories
- 15 amp electrical safety pack and electrical leads (of suitable length)
- 5/16" driver tips to suit hex type
- No. 2 and No.3 Phillips bits
- Spanner & socket sets
- Screw gun Extension bit (length up to 150mm)
Hand tools
- Double action Tin snips (left hand and right hand)
- Locking sheet metal pliers
- 2000 mm spirit level and 1200mm spirit level
- Oil-based marker pens
- Tool belt capable of holding impact driver and screws
- String lines (chalked & unchalked) and line marking chalk
- Adjustable G cramps / vice grips
- Measuring Tape
- Hammer
- Hacksaw and blades
- Old carpenters chisel
- Suitable cold chiselÂ
Essential safety equipment
- Step ladders
- Fall protection harness
- Carpenters trestles (saw horses)
- Aluminium trestles
- Aluminium planks
- Ply sheeting 2700mm x 1200mm x 15mm (Make platform for fabrication and re-use as scaffold deck for installation)
- Eye protection
- Hearing protection (when using power tools)
- Protective gloves
- Earth leakage circuit breaker for electrical tools